2.4 Inch IPS TFT LCD Display with 1500:1 Contrast for Industrial Instruments & Embedded Devices

The FUT0240QV103B-LCM-A1 is a compact 2.4-inch IPS TFT LCD module designed for industrial instruments, smart electronic devices and embedded control equipment requiring a small portrait-oriented color display.

Featuring 240 × 320 QVGA resolution, 320 cd/m² typical brightness, 1500:1 typical contrast ratio and an MCU parallel interface, this display provides a practical solution for equipment status monitoring, graphical menus, operating parameters and embedded user interfaces.

Its compact 2.40 mm module thickness, wide viewing angles and ST7789V2 driver IC make it suitable for OEM manufacturers developing space-constrained electronic products.

Key Product Advantages

1. 1500:1 High Contrast for Clear Equipment Information

Industrial instruments and embedded electronic devices often need to display numerical readings, operating status, warning indicators and graphical menus.

Low contrast can make information more difficult to distinguish, particularly when interfaces use dark backgrounds or small graphical elements.

The FUT0240QV103B-LCM-A1 provides a 1500:1 typical contrast ratio, supporting clear separation between light and dark interface elements.

Its Normally Black display mode is well suited to dark-background graphical interface designs.

2. IPS Technology with Wide Viewing Angles

Compact equipment displays may be viewed from different directions depending on installation position and user operation.

The module uses IPS TFT LCD technology with 80° typical viewing angles in all four directions.

This supports consistent presentation of icons, menus and numerical information from different viewing positions.

3. MCU 8080 Parallel Interface for Embedded Integration

Selecting the right display interface is important for controlling engineering development time and hardware compatibility.

This module uses an MCU 8080 parallel interface, supporting selectable 8-bit or 16-bit operation through the IM0 configuration.

The ST7789V2 driver IC and 40-pin FPC connection provide technical references for engineers developing embedded display systems.

The interface supports data communication, read/write control, reset and other signals required for display operation.

4. Compact Portrait Display Design

Electronic equipment manufacturers often face restrictions on available front-panel space.

The module measures 42.32 × 59.91 × 2.40 mm, with an active display area of 36.72 × 48.96 mm.

Its portrait layout is suitable for vertically arranged status information, configuration menus and graphical controls.

The compact mechanical design allows engineers to evaluate integration into small device enclosures.

5. 320 Nits Brightness for Indoor Electronic Devices

The module provides 320 cd/m² typical brightness, supported by a four-LED white backlight.

This brightness level is suitable for evaluation in indoor instruments, smart equipment and embedded control terminals.

Final readability should be verified under the actual lighting conditions of the finished product.

Technical Specifications

Common Customer Requirements

Poor Contrast on Small Equipment Displays

Small LCD screens must present readings, menus and warning indicators clearly.

Solution: The 1500:1 typical contrast ratio and Normally Black display technology support clear graphical presentation.

Limited Installation Space

Compact instruments and embedded electronics often have restricted space for the display module.

Solution: The 42.32 × 59.91 mm outline and 2.40 mm module thickness provide a compact display option for smaller equipment designs.

Difficulties with Display Interface Integration

An incompatible display interface can increase firmware debugging and hardware development time.

Solution: The MCU 8080 interface supports selectable 8-bit and 16-bit data configurations, providing flexibility for compatible embedded controller designs.

Viewing Angle Limitations

Equipment may be installed at different heights or viewed from multiple directions.

Solution: IPS technology provides 80° typical viewing angles in four directions.

Reliability in Electronic Equipment

Temperature changes, humidity and mechanical vibration can introduce additional requirements during equipment qualification.

Solution: The module specification includes environmental and mechanical reliability test conditions for engineering evaluation.

Reliability Testing

The specification includes the following test conditions:

• High-temperature operation: 70°C ±2°C / 120 hours
• Low-temperature operation: -20°C ±2°C / 120 hours
• High-temperature storage: 80°C ±2°C / 120 hours
• Low-temperature storage: -30°C ±2°C / 120 hours
• Humidity: 60°C ±2°C / 90% ±5% RH / 120 hours
• Thermal shock: -20°C to +70°C / 10 cycles
• Packaged vibration: 10–55 Hz, X/Y/Z directions
• Packaged drop test: 75 cm
• ESD: Contact ±4 kV / Air ±8 kV, Class B

These specified test conditions provide reference information for module qualification. Final equipment reliability depends on the complete product design and operating environment.

Typical Applications

Potential applications include:

• Industrial measuring instruments
• Compact equipment controllers
• Smart home electronic devices
• Embedded monitoring terminals
• Portable electronic equipment
• Handheld measurement devices
• Electronic configuration panels
• Small industrial HMI displays

Application suitability should be evaluated according to electrical, mechanical and environmental requirements.

OEM Display Support & Customization

Future Electronics supports OEM display projects through module selection, FPC customization discussions, interface matching, mechanical design evaluation and sample development.

Optional cover glass, touch panel integration and application-specific display configurations can be discussed according to project requirements.

Our team can assist OEM manufacturers with display selection, engineering communication and sample evaluation.

For detailed datasheets, interface timing, mechanical drawings, sample availability and customization requirements, please contact our sales and engineering team.

Contact us today to discuss your 2.4-inch IPS TFT LCD project and find a suitable display solution for your embedded equipment.