10.1 Inch Industrial TFT LCD 1024×600 for HMI Control, Automation & Monitoring – FUT1010SV28B-LCM-A1

The FUT1010SV28B-LCM-A1 is a 10.1-inch industrial TFT LCD module designed for industrial HMI systems, automation equipment, monitoring terminals and embedded control applications.

With a 1024 × 600 resolution and a large 222.72 × 125.28 mm active area, the display provides more space for operating data, process diagrams, alarm information and control menus. This makes it suitable for industrial equipment where operators need to view multiple types of information on a single screen.

The module supports a 24-bit RGB interface, with 400 cd/m² luminance, a typical 600:1 contrast ratio, and a 25 ms typical response time. Its 10.1-inch format makes it especially suitable for larger HMI panels and equipment interfaces that require better information visibility than smaller 4.3-inch or 7-inch displays.

Key Advantages

• 10.1-inch large display area for information-rich HMI interfaces
• 1024 × 600 resolution for clear process and control data
• RGB 24-bit interface for industrial embedded integration
• 400 cd/m² luminance for indoor industrial applications
• 600:1 typical contrast ratio for readable graphics and text
• 36-LED white backlight
• Up to 50,000 hours typical LED lifetime
• -20°C to +70°C operating temperature
• -30°C to +80°C storage temperature
• RoHS-compliant materials and manufacturing process

Common Customer Pain Points

1. Small screens cannot show enough control information

Industrial HMIs often need to display production status, parameters, alarms, trend charts and control buttons at the same time.

Solution:
The 10.1-inch display and 1024 × 600 resolution provide a larger information area, helping engineers build clearer and less crowded HMI layouts.

2. Backlight lifetime affects equipment maintenance

For industrial machines expected to operate for many years, frequent display replacement increases service cost and equipment downtime.

Solution:
The backlight is specified with a minimum LED life of 30,000 hours and a typical life of 50,000 hours, supporting longer equipment service cycles.

3. Engineers need a stable interface for integration

Changing display interfaces or timing requirements during development can increase engineering time and delay project schedules.

Solution:
The module uses a 24-bit RGB interface with a defined 50-pin interface and timing specification, helping compatible embedded systems integrate the display more efficiently.

4. Industrial equipment must tolerate environmental stress

Temperature changes, humidity, vibration and electrostatic discharge can cause display failures or unstable operation.

Solution:
The module is evaluated through high/low temperature operation and storage, humidity, thermal shock, vibration, drop and ESD testing.

Reliability Testing

The specification includes:

• High temperature operation: 70±2°C / 120H
• Low temperature operation: -20±2°C / 120H
• High temperature storage: 80±2°C / 120H
• Low temperature storage: -30±2°C / 120H
• Humidity: 60±2°C / 90%±5%RH / 120H
• Thermal shock: 10 cycles
• Vibration test: X/Y/Z axes
• Drop test: 75 cm
• ESD: Contact ±4kV / Air ±8kV

Typical Applications

Suitable for:

• Industrial HMI panels
• Factory automation equipment
• Production monitoring systems
• Machine control terminals
• Test and measurement equipment
• Industrial control cabinets
• Embedded control systems
• Smart manufacturing equipment